Description
In ceramic tape heaters, the resistive wire is placed inside ceramic stacked insulators. Due to this design feature, the maximum temperature of the heater can reach 700 ° C.
Can be manufactured in a case. For the manufacture of the case, stainless steel is used. The heating element is made of a material with high electrical resistivity.
Heat-resistant ceramics are used for electrical insulation, which can withstand high loads, which ensures the durability of the heating element.
It is a resistive wire in the form of a spiral, located inside ceramic insulators, assembled into a heater of the required shape and placed in a stainless steel case. They are used as heaters for extruders, injection molding machines and injection molding machines.
Likewise, holes can be made in the ceramic band heater according to customer requirements.
The heater is leaking and cannot operate in both humid and dusty environments.
Application
Ceramic tape heaters are designed to heat flat surfaces and are used to heat a wide range of equipment, materials and products - casting molds, extruders, glue machines, molds, stone products, granite or marble racks, etc.
Specifications
| Minimum width, mm | 8 |
| Maximum width, mm | 500 |
| Minimum length, mm | 50 |
| Maximum length, mm | 2000 |
| Thickness, mm | 10 |
| Case thickness, mm | 12,5 |
| Maximum electrical power, W / cm2 | 8,5 |
| Supply voltage, V | up to 1000 |
| Heater operating temperature, ° С | 550 |
| Diameters of dry heating elements, mm | 36; 46; |
| Maximum length, m | 3 |
| Supply voltage, V | up to 1000 |
| Maximum specific power, W / cm2 | 9 |
| Maximum heating temperature, ° С | 800 |
| Connection type | flexible leads or bolts |
English 
Русский